Mel-8704R-Vibe ProNavigator EMF, Temperature, Glow Buttons, Flashlight & Vibration Detection!

This is the basic mel meter for pros and beginners with a modification. Specially designed. 

Slightly used Unit - WITH BOX - HAS R-VIBE WRITTEN ON UNIT.

The latest technology for ghost investigating!! 

The large  clear display shows EMF AND Ambient Temperature simultaneously to provide the user with a direct correlation between EMF and Temperature change in the surrounding area.  This is the only meter that can do this!  This Instrument was designed by Pro-measure for Paranormal enthusiasts.

The Mel Meter Model 8704 was specifically designed for Paranormal Investigators. Many important features have been incorporated into this durable precision hand held instrument.

Features of the Mel-8704:

• ELF Range down to 30Hz1
• Glow in the dark buttons!
• Custom dual display correlates EMF & Temperature cold spots simultaneously!
• EMF Burst Mode feature for Tracking dynamic EMF movement
• Measurement Ranges: 20-2000 uTesla, 20000 mGauss
• Super bright custom "Nightview" display with on/off button IN RED
• Fast response thermocouple temperature sensor
• Record feature captures min and max values
• Tripod mountable

Measures EMF & Temperature "Cold Spots" Simultaneously

That's right... The Mel Meter is the only instrument that can do this.  If you're a Sci Fi Ghost Hunter fan, you'll notice tthese during their investigations. 

Custom "Night View" Display

The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away.

The display can be turned On or OFF manually for display viewing in dark areas  and it is also bright enough so that it can be used in total darkness to navigate stairwells,  corridors, and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light.

EMF Burst Mode

This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move  this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values.   So if you have an EMF meter with a standard LCD display, get ready for a big change!

Mel-Cal

The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur  and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple!